Check the Battery and Charging
- Charge the device: connect the tablet to a power source and leave it charging for at least 30–45 minutes. If the battery is completely drained, the charging icon may only appear after a few minutes, so don’t rush to conclusions.
- Check the charger and cable: use the original or manufacturer-recommended power charger. Weak or low-quality adapters and cables often do not provide enough charge or cause voltage fluctuations. If possible, test the same charger with another device and/or the tablet with a different cable.
- Check the electrical outlet and extension cord: plug the charger directly into the wall socket, bypassing extension cords or USB hubs that may limit power.
- Clean the charging port: carefully but gently remove dust or lint with a dry toothbrush, wooden toothpick, or compressed air. A dirty port often causes a “loose” contact effect and slow charging.
- Check for indications: do you see the battery icon, hear vibrations, or see an LED signal? If nothing happens, the problem may not only be with the battery but also with the charging port or power circuit.
If your tablet still won’t turn on, it’s likely that the charging port, battery, or power management IC (PMIC) is faulty. In such cases, contact the specialists at Fixas – we will perform a quick diagnosis and offer a safe, cost-effective repair.
Forced Restart
- Restart the device: hold the power button for 10–20 seconds. On some models, you may need to press the volume down (or up) button simultaneously – hold until you feel a vibration or see the logo.
- Safe mode: if the tablet turns on but freezes or shuts down, boot it into safe mode (relevant for Android devices). This will allow you to remove recently installed apps that may have caused the issues.
- Temporary software glitches: turn off the tablet, wait 1–2 minutes, and turn it back on; sometimes this restores normal operation after updates or critical errors.
- Factory reset: this is a last resort that erases all data. Before proceeding, ensure you have backups; the recovery process may vary by manufacturer and model.
If you doubt your skills, contact Fixas – our team can restore the software and, when possible, preserve your data.
Screen Issues
- Check the screen response: if the screen does not respond to touches but you hear sounds or the device vibrates, the issue may be with the touch sensor (panel) or the screen itself.
- Evaluate the image and lighting: a dim, barely visible image may indicate a failure of the lower screen backlight module or video transmission circuit. Check with a flashlight – can you see a faint image?
- Look for physical damage: cracks, stains, color bands, or flickering usually signal damage to the screen module.
- Connect an external display: if possible, connect the tablet to a monitor/TV (via a compatible adapter). This will help determine if the problem is limited to the screen.
Fixas offers quick screen (or just glass, when conditions allow) replacement using high-quality parts and tested assembly to ensure reliable, long-lasting results.
Addressing Moisture Damage
- Turn off the device: immediately turn off the tablet and do not attempt to turn it on – this reduces the risk of short circuits and further damage.
- Remove accessories: if there is a SIM or memory card, carefully remove it; take off the case to allow the device to dry faster.
- Wipe the exterior surfaces: use a dry, lint-free cloth. Do not heat the device with a hairdryer or on a radiator – heat can damage components and distort the screen.
- Do not use the “rice method”: rice does not remove moisture residues that cause corrosion; professional drying and cleaning equipment is required.
The specialists at Fixas use professional drying chambers and ultrasonic equipment to help remove moisture from the boards and prevent corrosion. Don’t delay – the sooner you have an inspection, the greater the chance of fully restoring the device.
Diagnostics and Repair
- Free diagnostics: Fixas will perform a comprehensive diagnosis and provide a clear conclusion and cost estimate before starting the repair.
- Quick repairs: common tasks – replacing batteries, screens, charging ports, speakers, or buttons – are usually completed within a few hours by appointment.
- Data security: we protect your data as much as possible; before more complex tasks, we discuss backup options.
- Warranty: we provide a 3-month warranty on all services – this confirms the quality of our work and parts.
Contact Fixas – our specialists are ready to assist with any technical failures in Vilnius and throughout Lithuania (device pickup by courier is also available by arrangement).
Need help with your device?
If your phone, computer, or tablet is not working properly, bring it to Fiksas. We perform fast diagnostics and often complete repairs within 1–3 hours.